6rheology's White:JL [27 articles] Export

Recent papers posted to 6rheology's library by the author White:JL. You can also see everyone's White:JL.

	An investigation of instability of phase morphology of blends of nylons with polyethylenes and polystyrenes and effects of compatibilizing agents [My Copy] Polymer Engineering & Science, Vol. 28, No. 2. (1988), pp. 69-80. by Cheng C. Chen, Eusebio Fontan, Kyonsuku Min, James L. White posted to blend compatibilizer lab3 nylon polyethylene polystyrene by 6rheology on 2009-05-09 05:44:58 as
	Phase morphology of injection-molded blends of nylon-6 and polyethylene and comparison with compression molding [My Copy] Polymer Engineering & Science, Vol. 31, No. 2. (1991), pp. 76-83. by Farid Ghiam, James L. White posted to blend compression_molding injection_molding lab3 nylon polyethylene polymer by 6rheology on 2009-05-09 05:24:04 as
	A comparative study of dispersing a polyamide 6 into a polypropylene melt in a Buss Kneader, continuous mixer, and modular intermeshing corotating and counter-rotating twin screw extruders [My Copy] Polymer Engineering & Science, Vol. 48, No. 4. (2008), pp. 756-766. by Keungjin Shon, Sug H. Bumm, James L. White posted to mr by 6rheology on 2009-04-23 03:50:58 as
	Simulation of non-isothermal flow in modular co-rotating twin screw extrusion [My Copy] Polymer Engineering & Science, Vol. 34, No. 3. (1994), pp. 229-237. by James L. White, Ziyun Chen posted to droplet lab3 twin-screw_extruder by 6rheology on 2009-02-20 09:03:43 as
	Influence of a compatibilizing agent on the phase morphology of a polyethylene-polyamide 6 blend in a modular intermeshing co-rotating twin screw extruder [My Copy] Polymer Engineering & Science, Vol. 34, No. 3. (1994), pp. 221-228. by Soonho Lim, James L. White posted to blend dead_stop lab3 polyamide polyethylene twin-screw_extruder by 6rheology on 2009-02-19 05:40:22 as
	Polypropylene/nylon 6 blends: Phase distribution morphology, rheological measurements, and structure development in melt spinning [My Copy] Journal of Applied Polymer Science, Vol. 28, No. 6. (1983), pp. 2011-2032. by Bo-Run Liang, James L. White, Joseph E. Spruiell, Bhuvenesh C. Goswami posted to blend fiber lab3 nylon polypropylene by 6rheology on 2009-02-19 01:31:16 as
	Fluid Mechanics of Intermeshing Counter-Rotating Twin Screw Extruders [My Copy] International Polymer Processing, Vol. 13, No. 4. (1998), pp. 342-346. by M. H. Hong, J. L. White posted to 1999 extrusion lab3 twin-screw_extruder by 6rheology on 2008-12-26 01:01:01 as
	Modeling Flow and Fusion of Mixtures/ Blends of Polymer Pellets and a Low Viscosity Phase in a Modular Co-rotating Twin Screw Extruder [My Copy] International Polymer Processing, Vol. 13, No. 3. (1998), pp. 247-261. by S. H. Lee, J. L. White posted to 1999 blend extrusion lab3 twin-screw_extruder by 6rheology on 2008-12-26 00:58:26 as
	Melting model for modular self wiping co-rotating twin screw extruders [My Copy] Polymer Engineering & Science, Vol. 38, No. 5. (1998), pp. 727-740. by Santosh Bawiskar, James L. White posted to 1997 extrusion lab3 melting twin-screw_extruder by 6rheology on 2008-12-03 08:26:39 as
	Residence time distributions and basic studies of flow and melting in a modular buss kneader [My Copy] Polymer Engineering & Science, Vol. 38, No. 9. (1998), pp. 1366-1377. by Min-Young Lyu, James L. White posted to 1999 barrel_pin buss_keader experiment extrusion lab3 mixing residence_time twin-screw_extruder by 6rheology on 2008-12-03 08:22:53 as
	Simulation of Non-Isothermal Flow in a Modular Buss Kneader and Comparison with Experiment [My Copy] International Polymer Processing, Vol. 12, No. 2. (1997), pp. 104-109. by M. Y. Lyu, J. L. White posted to 1997 buss_keader extrusion lab3 mixing numerical_simulation by 6rheology on 2008-11-22 05:52:24 as
	Modular Tangential Counter-Rotating Twin Screw Extrusion: Non-Newtonian and Non-Isothermal Simulation [My Copy] International Polymer Processing, Vol. 12, No. 3. (1997), pp. 278-287. by D. S. Bang, J. L. White posted to 1997 extrusion lab3 numerical_simulation twin-screw_extruder by 6rheology on 2008-11-22 05:36:56 as
	New model of flow in a Farrel Continuous Mixer [My Copy] Polymer Engineering & Science, Vol. 37, No. 7. (1997), pp. 1210-1216. by Dae-Suk Bang, James L. White posted to 1997 extrusion farrel lab3 mixing by 6rheology on 2008-11-22 05:27:41 as
	Simulation of thermal degradation, peroxide induced degradation, and maleation of polypropylene in a modular co-rotating twin screw extruder [My Copy] Polymer Engineering & Science, Vol. 37, No. 3. (1997), pp. 576-589. by Byoungjoo Kim, James L. White posted to 1997 degradation extrusion lab3 numerical_simulation twin-screw_extruder by 6rheology on 2008-11-22 05:26:17 as
	Simulation of linear viscoelastic flow behavior in the Buss Kneader [My Copy] Polymer Engineering & Science, Vol. 37, No. 3. (1997), pp. 623-635. by Min-Young Lyu, James L. White posted to 1997 buss_keader extrusion lab3 mixing numerical_simulation viscoelastic by 6rheology on 2008-11-22 05:14:19 as
	Modeling and Simulation of the Mechanisms of Melting in a Modular Co-rotating Twin Screw Extruder [My Copy] International Polymer Processing, Vol. 23, No. 3. (2008), pp. 242-251. by H. Jung, J. L. White posted to 2008a jspp_cae by 6rheology on 2008-11-12 21:32:02 as
	Modular tangential counter-rotating twin screw extrusion: Determination of screw pumping characteristics of modules and composite machine behavior [My Copy] Polymer Engineering & Science, Vol. 38, No. 3. (1998), pp. 485-498. by Dae-Suk Bang, Myung-Hyuk Hong, James L. White posted to 1999 droplet extrusion lab3 mixing twin-screw_extruder by 6rheology on 2008-08-02 02:53:02 as
	Modelling Flow in an Intermeshing Co-rotating Twin Screw Extruder: Flow in Kneading Discs [My Copy] Int. Polym. Process., Vol. 1 (1987), pp. 207-214. by W. Szydlowski, R. Brzoskowski, J. L. White posted to fan flow_analysis_network twin-screw_extruder by 6rheology on 2008-05-08 03:16:13 as
	Investigation of Melting Phenomena in Modular Co-rotating Twin Screw Extrusion [My Copy] International Polymer Processing, Vol. 18 (2003), pp. 127-132. by H. Jung, J. L. White posted to list_kajiwara3 list_kajiwara3-1 by 6rheology on 2008-04-14 10:14:11 as
	Engineering Analysis of Devolatilization of Various Additives in Intermeshing Co-rotating Twin Screw Extruders [My Copy] International Polymer Processing (February 2004), pp. 101-110. by J. Keum, J. L. White posted to list_kajiwara3 by 6rheology on 2008-04-14 10:01:57 as
	Experimental Studies and Modeling of Development of Dispersion and Fiber Damage in Continuous Compounding [My Copy] International Polymer Processing (March 2005), pp. 322-331. by K. Shon, D. Liu, J. L. White posted to list_kajiwara3 by 6rheology on 2008-04-14 09:48:27 as
	A Composite Model for Melting, Pressure and Fill Factor Profiles in a Metered Fed Closely Intermeshing Counter-rotating Twin Screw Extruder [My Copy] International Polymer Processing (February 2007), pp. 198-203. by K. Wilczynski, Q. Jiang, J. L. White posted to list_kajiwara3 by 6rheology on 2008-04-14 09:34:39 as
	Experimental Studies on Screw Characteristics in Closely Intermeshing Counter-rotating Twin Screw Extruder [My Copy] Int. Polym. Process., Vol. 23, No. 1. (2008), pp. 88-92. by M. H. Hong, Q. Jiang, J. L. White posted to 2008a jspp_cae list_kajiwara3 by 6rheology on 2008-04-14 09:02:36 as
	Melting Mechanism of Thermoplastic Elastomers and Comparison to Polyolefin Thermoplastic Melting Studies in a Single Screw Extruder [My Copy] International Polymer Processing (January 2008), pp. 72-81. by W. J. Lu, S. H. Bumm, J. L. White posted to list_kajiwara3 by 6rheology on 2008-04-14 09:00:55 as
	A comparative study of fiber breakage in compounding glass fiber-reinforced thermoplastics in a buss kneader, modular Co-rotating and counter-rotating twin screw extruders [My Copy] Polymer Engineering & Science, Vol. 39, No. 9. (1999), pp. 1757-1768. by Keungjin Shon, James L. White posted to droplet experiment lab3 mixing by 6rheology on 2007-10-31 05:46:21 as
	Experimental Studies and Modeling of Development of Dispersion and Fiber Damage in Continuous Compounding [My Copy] International Polymer Processing, Vol. 20, No. 3. (September 2005), pp. 322-331. by K. Shon, D. Liu, J. L. White posted to experiment mixing by 6rheology on 2007-10-24 12:01:13 as
	Development of constitutive equations for polymeric melts and solutions [My Copy] Journal of Applied Polymer Science, Vol. 7, No. 5. (1963), pp. 1867-1889. by J. L. White, A. B. Metzner posted to constitutive viscoelastic white--metzner by 6rheology on 2007-06-21 09:20:06 as

Note: You may cite this page as: http://www.citeulike.org/user/6rheology/author/White:JL

lab3	738
jspp_cae	471
2008a	381
viscoelastic	301
polymer_physics	164
droplet	147
extrusion	137
numerical_simulation	124
list_kajiwara3	120
instability	106
interface	104
blend	101
twin-screw_extruder	99
mixing	97
molecular_dynamics	96
phase_separation	80
polymer	77
1999	75
glass	72
suspension	63
mr	59
fiber	54
list_kajiwara	53
book	53
1997	53
monte_carlo	50
rheology	49
multi-layer	49
slip	47
composite	46
film	45
review	43
experiment	41
die	40
entanglement	37
shear	35
compounding	34
polyethylene	31
elongation	30
polypropylene	27
specific_heat	23
fem	21
list_h20_the_second_semester	20
single-screw_extruder	20
phonon	20
cae	19
electrolyte	18
polyamide	18
reactive	18
copolymer	17
ldpe	17
constitutive	17
list_kajiwara4	16
coating	15
polystyrene	15
polyelectrolyte	15
lcp	14
normal_mode	14
silica	14
hdpe	14
take_distributive_mixing	13
2009_rinko_kouho	13
method	12
turbulence	12
swell	12
adhesion	11
etakeda	11
raman	11
list_kajiwara3-1	11
rikei	11
morphology	10
compatibilizer	10
boson_peak	10
reader	10
diffusion	10
2009_rinko_zenki	10
residence_time	10
shell_model	9
normal_stress_difference	9
nylon	9
brownian_dynamics	9
nanotube	9
process	9
2008	8
mixing_efficiency	8
maleic_anhydride	8
hydrodynamic_interaction	8
star_polymer	7
electrophoresis	7
coextrusion	7
liquid_crystal	7
viscosity	7
water	7
viscoplastic	7
injection_molding	7
polydimethylsiloxane	7
graft	7
nanoparticle	7
chaos	7
two-fluid	7
free_energy	6
rheometer	6
ps	6
adaptive_mesh_refinement	6
afm	6
droplet_breakup	6
colloid	6
polymer_melt	6
intermediate-range	6
unsteady	5
emulsion	5
wall	5
cielab	5
dlm	5
ptt	5
polymer_solution	5
internal_mixer	5
wetting	5
dem	5
nonequilibrium	5
stokesian_dynamics	5
sharkskin	5
list_h20_the_second_semester2	5
oldroyd-b	5
mixer	5
coarse-grained-model	4
spurt	4
density_functional_theory	4
buckling	4
in-line_measurement	4
solvent-cast	4
pbt	4
au	4
lbm	4
entropy	4
kata	4
flow	4
adsorption	4
monodisperse	4
filament	4
generic	4
melting	4
branched_polymer	4
thermodynamics	4
rotor	4
mapping	4
bead_spring	4
pdms	4
rheological_properties	4
meissner	4
ldpe1	4
electrostatic	4
penalty_method	4
cross_model	4
sllod	4
solubility	4
steady	4
blow	3
magnetic	3
polyflow	3
non-newtonian	3
pmma	3
reader_t	3
mesh_free	3
pib	3
surface	3
mps	3
storage_modulus	3
elastic	3
dpd	3
jeffery	3
free_surface	3
buss_keader	3
metallocene	3
foam	3
immiscibility	3
scf	3
thickness	3
crystallization	3
heat-sealing	3
transparent_barrel	3
white--metzner	3
dna	3
dendrimer	3
wall_slip	3
whither	3
proper_orthogonal_decomposition	3
flow_strength	3
chain	3
respa	3
twin_screw_extruder	3
k-bkz	3
abs	3
polybutadiene	3
dead_stop	3
fan	3
melt_fracture	3
dynamical_system	3
list_kajiwara2	3
connffessit	3
stochastic	3
relaxation	3
lldpe	3
supercritical	3
fidap	3
surface_tension	3
sampling_barrel	3
melt	3
rh_rinko_h21	3
solid	3
polyolefin	2
bubble	2
plate	2
rheo-optical	2
fragility	2
filler	2
rod	2
film_casting	2
morisitas_index	2
network	2
fluorescent-label	2
immiscible_polymer	2
newtonian	2
ellipsoid	2
tensile	2
pla	2
extensional_flow_mixer	2
fluoropolymer	2
packed-bed	2
migration	2
rubber	2
log-conformation	2
phase	2
lubricant	2
nanocomposite	2
comparison	2
van_gurp--palmen	2
polyisoprene	2
simulation	2
relaxation_dynamics	2
blood	2
streamline	2
1978	2
fictious_domain	2
non_newtonian	2
dsc	2
particle_tracking_velocimetry	2
polycarbonate	2
closure	2
titania	2
doi_edwards	2
coarse-grain	2
polyisobutylene	2
bifurcation	2
mpb	2
self-consistent-field	2
grooved	2
level_set	2
skyline	2
phase-field	2
pin_mixing	2
infrared	2
polytetrafluoroethylene	2
pet	2
lattice_boltzmann	2
particle_tracing	2
fracture	2
giesekus	2
lees_edwards	2
anisotropic	2
optical_fiber	2
kinetic_theory	2
ldv	2
peel-strength	2
shear_band	2
mandrel	2
heat_transfer	2
shear_flow	2
film_blowing	2
debye-huckel	2
partially_filled	2
continuous_random_network	2
triple-screw_extruder	2
screw_mixing_element	2
devss-gsupg	2
krylov	2
polybutene	2
ldpe-a	2
gruneisen	2
surfactant	2
simulations	2
fdm	2
birefringence	2
bidisperse	2
diffuse_interface_method	2
pb	2
image_processing	2
rouse	2
plasmon	2
iupac_a	2
impact	2
1975	2
gel	2
herschel-bulkley	2
rotational_molding	2
in_situ_compatibilization	2
miscibility	2
tribology	2
microcellular	2
phase_angle	2
thixotropic	2
silica_glass	1
draw_resonance	1
stress-diffusion	1
microstructure	1
hydrodynamic	1
pdms-pib	1
dissipative_particle_dynamics	1
nano-silica	1
oscillation	1
adcb	1
appearent_viscosity	1
fene-p_constitutive	1
spherulite	1
universal_relation	1
unsteady_shear	1
sem	1
micelle	1
thermostat	1
pib_c14	1
s-pdms	1
hamiltonian	1
problems	1
hydration	1
polysulfone	1
refractive_index	1
peo	1
preconditioning	1
oscillatory	1
potential_energy_landscape	1
kunikawa	1
polybutadienes	1
rheological_study	1
fene	1
distributed_lagrange_multiplier	1
homogeneous_dispersion	1
pin	1
numerical_study	1
1996	1
sound_wave	1
the_nakamura_equation	1
geometry	1
area_stretching_distribution	1
extension	1
microrheology	1
shape_memory_polymer	1
ionomer	1
zeolite	1
test	1
nonlinear_flow	1
nanoparticles	1
absorption	1
empirical	1
slot	1
polmer_solution	1
source	1
iupac-ldpe	1
heat_sealing	1
smoothed_profile	1
lab	1
2009_rinko_kouki	1
inverse_problem	1
pvac	1
saxs	1
hot-tack	1
porous	1
miscible	1
polmer_flow	1
algorithm	1
double_trace_moment	1
mesh_immersion_technique	1
filling	1
gmres	1
pomini	1
for	1
density_of_state	1
color_homogeneity_index	1
sign_singularity	1
magnetorheology	1
leonov	1
space_time	1
homopolymer	1
devssdg	1
particle_mesh_ewald	1
cartesian_representation_algorithm	1
coil-stretch	1
predictability	1
phase_inversion	1
conjugate_residual	1
artificial_viscosity	1
xrd	1
viscous	1
pen	1
nonlinear_extensional_flow	1
tack	1
cavity	1
twin_blade	1
excel	1
single_particle_model	1
matsuyama-kato_free_energy	1
peldom	1
strength	1
vof	1
scheme	1
carcass	1
fluid	1
clay	1
helical_coordinate	1
nano_imprint	1
alkane	1
heat-sealed	1
rough	1
ehl_simulation	1
montmorillonite	1
boundary_layer	1
processing	1
temperature_dependency	1
o	1
compression_molding	1
heat	1
wall_confinement	1
double_layer	1
nonlinear_rheology	1
erosion	1
polyoxymethylene	1
shear_thinning	1
incomplete_lu	1
lee_park	1
piv	1
feedblock	1
aging	1
distributive_mixing	1
natural_rubber	1
molecular_weights	1
pair-lubirication	1
linear_chain_rod	1
critical-point	1
supg	1
danckwerts	1
mutigrid	1
luminescence	1
confocal	1
flory_fox	1
polydisperse	1
interdiffusion	1
carbon_black	1
exponential_type	1
shear_rate	1
weld-line	1
compass	1
immersed_interface_method	1
compressible	1
segregation	1
shish-kebab	1
two-dimensional	1
viscoelastichybrid_material	1
autothermal	1
nano_imprint_lithography	1
jamming	1
solution	1
finite_but_long_chain	1
kihatu	1
singularity	1
coherent_elastic	1
folgar-tucker-lipscomb	1
silver	1
peg-ppg	1
shear_stress	1
magnesium	1
multi-clearance	1
1971	1
sundyxtrud	1
dye	1
banbury_mixer	1
viscosity_ratio	1
rheometly	1
ewald	1
metallic	1
microcrystallite	1
discrete_variational_derivative	1
element	1
dispersion	1
modified_avrami_equation	1
pineapple	1
uldpe	1
strain_hardening	1
degradation	1
biomaterial	1

6rheology's White:JL [27 articles] Export

6rheology's tags