6rheology's list_kajiwara3 [120 articles] Export

Recent papers added to 6rheology's library classified by the tag list_kajiwara3. You can also see everyone's list_kajiwara3.

Hide details

	Viscous Properties of Thermoplastic Starches from Different Botanical Origin [My Copy] Int. Polym. Process., Vol. 22, No. 5. (2007), pp. 471-479. by G. Della Valle, B. Vergnes, D. Lourdin posted to jspp_cae list_kajiwara3 by 6rheology on 2008-05-14 17:17:28 as
	Development of Polymer Blend Morphology along an Extruder with Different Screw Geometries [My Copy] Int. Polym. Process., Vol. 23, No. 1. (2008), pp. 47-54. by H. X. Huang, G. Jiang, X. J. Li posted to 2008a blend jspp_cae list_kajiwara3 morphology single-screw_extruder by 6rheology on 2008-05-06 17:43:39 as
	Optimisation-based design of extruders [My Copy] Plastics, Rubber and Composites, Vol. 33, No. 9-10. (November 2004), pp. 416-425. by J. Covas, A. Gaspar-Cunha posted to list_kajiwara3 by 6rheology on 2008-05-02 09:21:38 as
	THE EFFECTS OF CONSTRUCTIONAL SOLUTIONS OF PLASTICIZING SCREW CONFIGURATIONS AND EXTRUSION CONDITIONS ON POLYPROPYLENE COMPOSITE PROPERTIES [My Copy] Polimery, Vol. 50 (2005), pp. 881-889. by Stasiek, Joachim posted to list_kajiwara3 by 6rheology on 2008-05-02 09:19:01 as
	Adaptive finite element simulations of fluid flow in twin-screw extruders [My Copy] Computers & Chemical Engineering, Vol. 27, No. 4. (15 April 2003), pp. 491-500. by F. Bertrand, F. Thibault, L. Delamare, P. A. Tanguy posted to list_kajiwara3 by 6rheology on 2008-04-21 10:42:26 as
	On-line monitoring of the residence time distribution along a kneading block of a twin-screw extruder [My Copy] Polymer Testing, Vol. 23, No. 8. (December 2004), pp. 925-937. by O. S. Carneiro, J. A. Covas, J. A. Ferreira, M. F. Cerqueira posted to list_kajiwara3 by 6rheology on 2008-04-21 10:40:01 as
	Numerical study of the extrusion process in cereals production: Part I. Fluid-dynamic analysis of the extrusion system [My Copy] Journal of Food Engineering, Vol. 73, No. 2. (March 2006), pp. 103-111. by Antonio Ficarella, Marco Milanese, Domenico Laforgia posted to list_kajiwara3 by 6rheology on 2008-04-21 10:16:14 as
	Examination of the mixing ability of single and twin screw mixers using 2D finite element method simulation with particle tracking [My Copy] Journal of Food Engineering, Vol. 79, No. 3. (April 2007), pp. 956-969. by R. Connelly, J. Kokini posted to list_kajiwara3 mr by 6rheology on 2008-04-21 10:14:18 as along with 1 person martinjrobins
	Phase continuity detection and phase inversion phenomena in immiscible polypropylene/polystyrene blends with different viscosity ratios [My Copy] Polymer, Vol. 48, No. 20. (21 September 2007), pp. 5917-5927. by T. S. Omonov, C. Harrats, P. Moldenaers, G. Groeninckx posted to blend list_kajiwara3 rheometer by 6rheology on 2008-04-21 10:11:06 as
	Single Screw Extrusion of Natural Fibre Reinforced Thermoplastics (NFRTP) [My Copy] International Polymer Processing, Vol. 18 (2003), pp. 33-40. by F. G. Torres, B. Ochoa, E. Machicao posted to list_kajiwara3 by 6rheology on 2008-04-14 10:18:57 as
	Melt Spinning of Reactive Extruded and/or Blended Polymer Fibers by Means of an Online Coupled Twin Screw Extruder [My Copy] International Polymer Processing, Vol. 18 (2003), pp. 74-79. by R. Beyreuther, B. T舅dler, R. Vogel, M. Hoffmann posted to list_kajiwara3 by 6rheology on 2008-04-14 10:17:54 as
	Characterisation of Finite Length Composites [My Copy] International Polymer Processing, Vol. 18 (2003), pp. 20-32. by W. Gleissle, J. Curry posted to list_kajiwara3 by 6rheology on 2008-04-14 10:16:52 as
	Modeling Filler Dispersion along a Twin-Screw Extruder [My Copy] International Polymer Processing, Vol. 18 (2003), pp. 12-19. by T. Lozano, P. G. Lafleur, M. Grmela, B. Vergnes posted to experiment list_kajiwara3 list_kajiwara3-1 morphology twin-screw_extruder by 6rheology on 2008-04-14 10:15:12 as
	Investigation of Melting Phenomena in Modular Co-rotating Twin Screw Extrusion [My Copy] International Polymer Processing, Vol. 18 (2003), pp. 127-132. by H. Jung, J. L. White posted to list_kajiwara3 list_kajiwara3-1 by 6rheology on 2008-04-14 10:14:11 as
	Effects of Zinc Fatty Acids on Improved Polymer Processing for Critical Extrusions [My Copy] International Polymer Processing, Vol. 18 (2003), pp. 156-165. by K. J. Kim, J. Vanderkooi posted to list_kajiwara3 by 6rheology on 2008-04-14 10:13:15 as
	Influence of Non-Newtonian Behaviour on the Processing Characteristics of Wall-slipping Materials [My Copy] International Polymer Processing, Vol. 18 (2003), pp. 115-121. by H. Potente, M. Kurte, H. Ridder posted to list_kajiwara3 list_kajiwara3-1 by 6rheology on 2008-04-14 10:10:43 as
	A Powerful Universal Plasticating System for Single-screw-extruders and Injection-moulding Machines [My Copy] International Polymer Processing, Vol. 18 (2003), pp. 226-234. by E. Gr・schlo posted to list_kajiwara3 by 6rheology on 2008-04-14 10:09:00 as
	Study on Functionalization of Isotactic PP with Maleic Anhydride in an Internal Mixer and a Twin-screw Extruder [My Copy] International Polymer Processing, Vol. 18 (2003), pp. 285-290. by S. M. Ghahari, H. Nazokdast, H. Assempour posted to list_kajiwara3 by 6rheology on 2008-04-14 10:08:08 as
	Modeling and Analysis of Helicoidal Flow in a Conical Extruder [My Copy] Int. Polym. Process., No. 3. (2003), pp. 219-225. by A. Sarioglu, -A posted to list_kajiwara3 list_kajiwara3-1 by 6rheology on 2008-04-14 10:06:52 as
	Analysis of the Morphological Development of PBT/ABS Blends during the Twin Screw Extrusion and Injection Molding Processes [My Copy] International Polymer Processing (April 2003), pp. 376-381. by E. N. Ito, L. A. Pessan, J. A. Covas, E. Hage posted to list_kajiwara3 by 6rheology on 2008-04-14 10:05:28 as
	Experimental Development of Processing Technology for Yuba-like Films Using Twin Screw Extrusion [My Copy] International Polymer Processing (April 2003), pp. 343-348. by S. L. Hwang, S. J. Liu, W. L. Chen, C. Y. Wang, S. W. Chou posted to list_kajiwara3 by 6rheology on 2008-04-14 10:04:21 as
	Physico-Mathematical Model for the Description of the Temperature Development and the Power Consumption in Co-Rotating Twin Screw Extruders [My Copy] International Polymer Processing (January 2004), pp. 3-12. by H. Potente, K. Kretschmer, T. Pohl posted to list_kajiwara3 list_kajiwara3-1 by 6rheology on 2008-04-14 10:03:03 as
	Engineering Analysis of Devolatilization of Various Additives in Intermeshing Co-rotating Twin Screw Extruders [My Copy] International Polymer Processing (February 2004), pp. 101-110. by J. Keum, J. L. White posted to list_kajiwara3 by 6rheology on 2008-04-14 10:01:57 as
	Modeling the Flow in the Metering Zone of Single Screw Extruders Using a Helical Geometry Model [My Copy] International Polymer Processing (February 2004), pp. 95-100. by M. H. R. Ghoreishy, Razavi M. Nouri posted to list_kajiwara3 by 6rheology on 2008-04-14 10:00:53 as
	Parametric Study of the Mixing Efficiency in a Kneading Block Section of a Twin-screw Extruder [My Copy] International Polymer Processing, Vol. 19 (March 2004), pp. 207-217. by B. Alsteens, V. Legat, T. Avalosse posted to list_kajiwara3 list_kajiwara3-1mixing_efficiency mesh_superposition_technique polyflow twin-screw_extruder by 6rheology on 2008-04-14 09:59:52 as
	Experiments on Characteristic Deformation and Breakup Behaviors of an Immiscible Drop in a Screw Channel Flow [My Copy] International Polymer Processing (March 2004), pp. 218-224. by H. S. Jun, W. R. Hwang, T. H. Kwon posted to list_kajiwara3 list_kajiwara3-1 by 6rheology on 2008-04-14 09:58:36 as
	Determination of the Residence Time Distribution in Twin Screw Extruders via Free Radical Modification of PE [My Copy] International Polymer Processing (April 2004), pp. 335-341. by M. K. Razaviaghjeh, H. Nazockdast, H. Assempour posted to list_kajiwara3 by 6rheology on 2008-04-14 09:54:28 as
	On-line Visualization of PS/PP Melting Mechanisms in a Co-rotating Twin Screw Extruder [My Copy] International Polymer Processing (April 2004), pp. 342-349. by H. Chen, U. Sundararaj, K. Nandakumar, M. D. Wetzel posted to list_kajiwara3 list_kajiwara3-1 by 6rheology on 2008-04-14 09:50:49 as
	Monitoring Reactive Processes along the Extruder [My Copy] International Polymer Processing (February 2005), pp. 121-127. by J. A. Covas, A. V. Machado posted to list_kajiwara3 by 6rheology on 2008-04-14 09:49:32 as
	Experimental Studies and Modeling of Development of Dispersion and Fiber Damage in Continuous Compounding [My Copy] International Polymer Processing (March 2005), pp. 322-331. by K. Shon, D. Liu, J. L. White posted to list_kajiwara3 by 6rheology on 2008-04-14 09:48:27 as
	Experimental Study on Factors Influencing Throughput Rate and Process of Polymer-Mineral Filler Mixing in a Twin Screw Extruder [My Copy] International Polymer Processing (April 2005), pp. 388-397. by J. Ishibashi, T. Kikutani posted to list_kajiwara3 by 6rheology on 2008-04-14 09:47:17 as
	Organic-Inorganic Hybrid Material Synthesis by on Line Coupling Twin Screw Extruder with a Microwave Oven [My Copy] International Polymer Processing (April 2005), pp. 345-351. by S. Jiguet, V. Bounor-Legar・, F. Melis, A. Michel posted to list_kajiwara3 by 6rheology on 2008-04-14 09:45:47 as
	3D Finite Element Simulation of Processing of Generalized Newtonian Fluids in Counter-rotating and Tangential TSE and Die Combination [My Copy] International Polymer Processing (April 2005), pp. 398-409. by M. Malik, D. M. Kalyon posted to list_kajiwara3 by 6rheology on 2008-04-14 09:44:20 as
	Melt Intercalation in Montmorillonite/Polystyrene Nanocomposites [My Copy] International Polymer Processing (April 2005), pp. 423-431. by N. Nassar, L. A. Utracki, M. R. Kamal posted to list_kajiwara3 by 6rheology on 2008-04-14 09:43:02 as
	Experiments and Analysis of Effect of Calender Gaps on Melting of PVC Powders in an Intermeshing Counter-rotating Twin-screw Extruder [My Copy] International Polymer Processing (January 2006), pp. 17-23. posted to list_kajiwara3 list_kajiwara3-1 by 6rheology on 2008-04-14 09:41:39 as
	Melt Compounding of Polymeric Nanocomposites [My Copy] International Polymer Processing (January 2006), pp. 3-16. posted to list_kajiwara3 by 6rheology on 2008-04-14 09:40:33 as
	Method for the Optimisation of Screw Elements for Tightly Intermeshing, Co-rotating Twin Screw Extruders [My Copy] International Polymer Processing (February 2006), pp. 149-154. by H. Potente, A. Th・en posted to list_kajiwara3 list_kajiwara3-1 by 6rheology on 2008-04-14 09:38:53 as
	The Reactive Extrusion of Thermoplastic Polyurethane and the Effect of the Depolymerization Reaction [My Copy] International Polymer Processing (March 2006), pp. 295-308. by V. W. A. Verhoeven, A. D. Padsalgikar, K. J. Ganzeveld, L. P. B. M. Janssen posted to list_kajiwara3 by 6rheology on 2008-04-14 09:37:35 as
	Numerical Simulation of Viscous Flow in a Partially filled Co-rotating Twin Screw Extruder [My Copy] Int. Polym. Process., Vol. 22, No. 1. (2007), pp. 61-72. by G. Pokriefke posted to conveying_section free_surface jspp_cae list_kajiwara3 list_kajiwara3-1 numerical_simulation partially_filled twin-screw_extruder two-fluid vof by 6rheology on 2008-04-14 09:35:59 as
	A Composite Model for Melting, Pressure and Fill Factor Profiles in a Metered Fed Closely Intermeshing Counter-rotating Twin Screw Extruder [My Copy] International Polymer Processing (February 2007), pp. 198-203. by K. Wilczynski, Q. Jiang, J. L. White posted to list_kajiwara3 by 6rheology on 2008-04-14 09:34:39 as
	Functionalization of Low Density Polyethylene with Ricinol-2-oxazoline Methyl Maleate in a Twin-screw Extruder [My Copy] International Polymer Processing (February 2007), pp. 122-131. by R. Jeziska posted to list_kajiwara3 by 6rheology on 2008-04-14 09:32:56 as
	Reactive Processing of Thermoplastic Polymers: A Review of the Fundamental Aspects [My Copy] Int. Polym. Process., Vol. 22, No. 3. (2007), pp. 218-258. by P. Cassagnau, V. Bounor-Legare, F. Fenouillot posted to jspp_cae list_kajiwara3 mixing by 6rheology on 2008-04-14 09:31:34 as
	Characteristic Curves based on 3D Non-isothermal Flow Computations in Single-screw Extruder for Non-Newtonian Fluids [My Copy] International Polymer Processing (April 2007), pp. 324-333. by A. Khalifeh, J. R. Clermont posted to list_kajiwara3 list_kajiwara3-1 by 6rheology on 2008-04-14 09:29:38 as
	Evaluation of Properties and Biodeterioration Potential of Polyethylene and Aliphatic Polyester Blends [My Copy] International Polymer Processing (May 2007), pp. 512-518. by A. V. Machado, I. Moura, F. M. Duarte, G. Botelho, R. Nogueira, A. G. Brito posted to list_kajiwara3 by 6rheology on 2008-04-14 09:28:18 as
	Improvement of the Mechanical Properties of Soy Protein Isolate Based Plastics through Formulation and Processing [My Copy] International Polymer Processing (May 2007), pp. 489-496. by M. Baboi, G. Srinivasan, J. L. Jane, D. Grewell posted to list_kajiwara3 by 6rheology on 2008-04-14 09:26:30 as
	New Developments in Biodegradable Starch-based Nanocomposites [My Copy] International Polymer Processing (May 2007), pp. 463-470. by J. M. Raquez, Y. Nabar, R. Narayan, P. Dubois posted to list_kajiwara3 by 6rheology on 2008-04-14 09:23:10 as
	Tapioca Starch-poly (lactic acid)-based Nanocomposite Foams as Affected by Type of Nanoclay [My Copy] International Polymer Processing (May 2007), pp. 429-435. by S. Y. Lee, Y. X. Xu, M. A. Hanna posted to list_kajiwara3 by 6rheology on 2008-04-14 09:21:27 as
	Solid and Microcellular Polylactide-Carbon Nanotube Nanocomposites [My Copy] International Polymer Processing (May 2007), pp. 418-428. by S. Pilla, A. Kramschuster, S. Gong, A. Chandra, L. S. Turng posted to list_kajiwara3 by 6rheology on 2008-04-14 09:19:49 as
	Effects of Starch Types On Mechanical Properties of Poly(lactic acid)/Starch Composites [My Copy] International Polymer Processing (May 2007), pp. 410-417. by X. S. Sun, R. Acioli-Moura, W. Li posted to list_kajiwara3 by 6rheology on 2008-04-14 09:18:17 as
	Biaxial Orientation of Polylactide/Thermoplastic Starch Blends [My Copy] International Polymer Processing (May 2007), pp. 402-409. by N. Chapleau, M. A. Huneault, H. Li posted to list_kajiwara3 by 6rheology on 2008-04-14 09:16:07 as

Note: You may cite this page as: http://www.citeulike.org/user/6rheology/tag/list_kajiwara3

Result page: 1 2 3 Next

lab3	738
jspp_cae	471
2008a	381
viscoelastic	301
polymer_physics	164
droplet	147
extrusion	137
numerical_simulation	124
list_kajiwara3	120
instability	106
interface	104
blend	101
twin-screw_extruder	96
molecular_dynamics	93
mixing	92
phase_separation	80
polymer	77
1999	75
glass	70
suspension	63
mr	59
fiber	54
1997	53
book	53
list_kajiwara	53
monte_carlo	50
multi-layer	49
rheology	48
composite	46
film	45
slip	45
review	41
die	40
experiment	40
shear	35
compounding	34
elongation	30
polyethylene	30
polypropylene	27
specific_heat	23
fem	21
list_h20_the_second_semester	20
phonon	20
cae	19
single-screw_extruder	19
electrolyte	18
polyamide	18
reactive	18
constitutive	17
copolymer	17
entanglement	17
ldpe	17
entangled_polymer	16
list_kajiwara4	16
coating	15
polyelectrolyte	15
polystyrene	15
hdpe	14
lcp	14
normal_mode	14
2009_rinko_kouho	13
silica	13
method	12
swell	12
take_distributive_mixing	12
turbulence	12
adhesion	11
etakeda	11
list_kajiwara3-1	11
raman	11
rikei	11
2009_rinko_zenki	10
boson_peak	10
compatibilizer	10
diffusion	10
morphology	10
reader	10
brownian_dynamics	9
nanotube	9
normal_stress_difference	9
nylon	9
process	9
shell_model	9
2008	8
hydrodynamic_interaction	8
maleic_anhydride	8
mixing_efficiency	8
chaos	7
coextrusion	7
electrophoresis	7
graft	7
injection_molding	7
liquid_crystal	7
nanoparticle	7
polydimethylsiloxane	7
residence_time	7
star_polymer	7
two-fluid	7
viscoplastic	7
viscosity	7
water	7
adaptive_mesh_refinement	6
afm	6
colloid	6
droplet_breakup	6
free_energy	6
intermediate-range	6
polymer_melt	6
ps	6
rheometer	6
dem	5
dlm	5
emulsion	5
internal_mixer	5
list_h20_the_second_semester2	5
mixer	5
nonequilibrium	5
oldroyd-b	5
polymer_solution	5
ptt	5
sharkskin	5
stokesian_dynamics	5
unsteady	5
wetting	5
adsorption	4
au	4
bead_spring	4
branched_polymer	4
buckling	4
coarse-grained-model	4
cross_model	4
density_functional_theory	4
electrostatic	4
filament	4
flow	4
generic	4
in-line_measurement	4
kata	4
lbm	4
ldpe1	4
mapping	4
meissner	4
melting	4
monodisperse	4
pbt	4
pdms	4
penalty_method	4
rheological_properties	4
rotor	4
sllod	4
solubility	4
solvent-cast	4
spurt	4
steady	4
thermodynamics	4
abs	3
blow	3
buss_keader	3
chain	3
connffessit	3
crystallization	3
dead_stop	3
dendrimer	3
dna	3
dpd	3
dynamical_system	3
elastic	3
entangled_polymer_melts	3
fan	3
fidap	3
flow_strength	3
foam	3
free_surface	3
heat-sealing	3
immiscibility	3
jeffery	3
k-bkz	3
list_kajiwara2	3
lldpe	3
magnetic	3
melt	3
melt_fracture	3
mesh_free	3
metallocene	3
mps	3
non-newtonian	3
pib	3
pmma	3
polybutadiene	3
polyflow	3
proper_orthogonal_decomposition	3
reader_t	3
relaxation	3
respa	3
scf	3
solid	3
stochastic	3
storage_modulus	3
supercritical	3
surface	3
surface_tension	3
thickness	3
transparent_barrel	3
wall_slip	3
white--metzner	3
whither	3
1975	2
1978	2
anisotropic	2
bidisperse	2
bifurcation	2
birefringence	2
blood	2
bubble	2
closure	2
coarse-grain	2
comparison	2
continuous_random_network	2
debye-huckel	2
devss-gsupg	2
diffuse_interface_method	2
doi_edwards	2
dsc	2
ellipsoid	2
extensional_flow_mixer	2
fdm	2
fictious_domain	2
filler	2
film_blowing	2
film_casting	2
fluorescent-label	2
fracture	2
fragility	2
gel	2
giesekus	2
grooved	2
gruneisen	2
heat_transfer	2
herschel-bulkley	2
image_processing	2
immiscible_polymer	2
impact	2
infrared	2
in_situ_compatibilization	2
iupac_a	2
kinetic_theory	2
krylov	2
lattice_boltzmann	2
ldpe-a	2
lees_edwards	2
level_set	2
log-conformation	2
mandrel	2
microcellular	2
migration	2
miscibility	2
morisitas_index	2
mpb	2
nanocomposite	2
network	2
newtonian	2
non_newtonian	2
optical_fiber	2
packed-bed	2
partially_filled	2
particle_tracing	2
particle_tracking_velocimetry	2
pb	2
peel-strength	2
pet	2
phase	2
phase_angle	2
phase-field	2
pin_mixing	2
pla	2
plasmon	2
plate	2
polybutene	2
polycarbonate	2
polyisobutylene	2
polyisoprene	2
polyolefin	2
polytetrafluoroethylene	2
relaxation_dynamics	2
rheo-optical	2
rod	2
rotational_molding	2
rouse	2
rubber	2
sampling_barrel	2
screw_mixing_element	2
self-consistent-field	2
shear_band	2
shear_flow	2
simulation	2
simulations	2
skyline	2
streamline	2
surfactant	2
tensile	2
thixotropic	2
titania	2
tribology	2
triple-screw_extruder	2
van_gurp--palmen	2
wall	2
1971	1
1979	1
1986	1
1995	1
1996	1
1998	1
absorption	1
adcb	1
aging	1
algorithm	1
alkane	1
analytic	1
angells_classification	1
antec	1
appearent_viscosity	1
area_stretching_distribution	1
artificial_viscosity	1
autothermal	1
banbury_mixer	1
barrel_pin	1
biomaterial	1
birefingence	1
boundary_layer	1
boundary_slip	1
capillary	1
carbon_black	1
carcass	1
cartesian_representation_algorithm	1
cavity	1
chemical_reaction	1
clay	1
co2	1
code	1
coherent_elastic	1
coil-stretch	1
collision	1
color_homogeneity_index	1
compass	1
compressible	1
compression_molding	1
cone_plate_rheometer	1
confocal	1
conjugate_residual	1
continuous_time_random_walk	1
control	1
conveying_section	1
critical-point	1
crystal	1
crystallization_kinetics	1
crystallization_model	1
danckwerts	1
data	1
debye	1
degradation	1
density_of_state	1
devssdg	1
discrete_variational_derivative	1
dispersion	1
dissipative_particle_dynamics	1
distributed_lagrange_multiplier	1
distributive_mixing	1
double_layer	1
double_trace_moment	1
drag_reduction	1
draw_resonance	1
dye	1
ehl_simulation	1
element	1
empirical	1
encapsulation	1
ergodicity-breaking	1
erosion	1
evaporation	1
ewald	1
excel	1
exponential_integrator	1
exponential_type	1
extension	1
extensional_flows	1
extrusion_coating	1
farrel	1
fcm	1
feedblock	1
fene	1
fene-p_constitutive	1
field_theory	1
filling	1
finite_but_long_chain	1
flexibility	1
flory_fox	1
flow_analysis_network	1
fluid	1
fluoropolymer	1
folgar-tucker-lipscomb	1
for	1
fortran	1
fpd1000	1
ftir	1
gauss-legendre	1
geometry	1
gmres	1
hamiltonian	1
hdpe_ldpe	1
heat	1
heat-sealed	1
heat_sealing	1
helical_coordinate	1
hollow	1
homogeneous_dispersion	1
homopolymer	1
hot_	1
hot-tack	1
hydration	1
hydrodynamic	1
hydrodynamics_of_thermosets	1
immersed_interface_method	1
incomplete_lu	1
inflation	1
information	1
intercalation	1
interdiffusion	1
inverse_problem	1
ionomer	1
iupac-ldpe	1
jamming	1
kihatu	1
kinetic_trap	1
kunikawa	1
lab	1
langevin	1
larson	1
laser_doppler	1
lcmax	1
ldv	1
lee_park	1
leonov	1
linear_chain_rod	1
list_kajiwara3-1mixing_efficiency	1
long-chain-branching	1
lubricant_films	1
maddock	1
magnesium	1
magnetorheology	1
matsuyama-kato_free_energy	1
maximum_shear_stress	1
maxwell	1
mechanics	1
mems	1
mesh_imersion	1
mesh_immersion_technique	1
mesh_superposition_technique	1
mesoscopic_simulation	1
metal	1
metallic	1
micelle	1
microcrystallite	1
microrheology	1
microstructure	1
miscible	1
modified_avrami_equation	1
molecular_rheology	1
molecular_weights	1
montmorillonite	1
mpimoldflow	1
multi-affine	1
multi-clearance	1
multipole	1
mutigrid	1
nano_imprint	1
nano_imprint_lithography	1
nanorod	1
nano-silica	1
natural_rubber	1
navier-stokes	1
noisy	1
non	1
non_isothemal	1
nonlinear_extensional_flow	1
nonlinear_flow	1
nonlinear_homogenization_method	1
nonlinear_rheology	1
nose-hoover	1
numerical_study	1
o	1
oscillation	1
oscillatory	1
oxide	1
pair-lubirication	1
particle_mesh_ewald	1
pcl	1
pdms-pib	1
peg-ppg	1
pel	1
peldom	1
pen	1
peo	1
petsc	1
phase-contrast	1
phase_inversion	1
phase_separating	1
phosphate	1
pib_c14	1
piezo-viscous	1
pin	1
pineapple	1
piv	1
polmer_flow	1
polmer_solution	1
polybutadienes	1
polydisperse	1
polydispersity	1
polyester	1
polyisobutene	1
polymer_blends	1
polymerinorganic	1
polymer_layered_silicate_composite	1
polyoxymethylene	1
polysulfone	1
polyurethane	1
pomini	1
porous	1
potential_energy_landscape	1
powder	1
preconditioning	1
predictability	1
problems	1
processing	1
projection	1
p-sllod	1
psm	1
pva	1
pvac	1
rate-controlled	1
refractive_index	1
relaxation_times	1
rheological_study	1
rheometly	1
rhoology	1
ring_extruder	1
ring_polymer	1
sanchez-lacombe_equation_of_state	1
santoprene	1
sastry_density	1
saxs	1
scanning_electron_microscopy	1
scheme	1
screwflow-multi	1
second_order_fluid	1
segregation	1
sem	1
separation	1
shannon_entropy	1
shape_memory_polymer	1
shear_rate	1
shear_stress	1
shear_thinning	1
shish-kebab	1
sign_singularity	1
silica_glass	1
silver	1
single_particle_model	1
single_rotor	1
singularity	1
sintering	1
slot	1
smoothed_profile	1
soft_matter	1
solution	1
solvent	1
solving	1
sound_wave	1
source	1
space_time	1
s-pdms	1
spherulite	1
strain_flow	1
strain_hardening	1
strain_rate	1
streamline_element	1
strength	1
stress-controlled	1
stress-diffusion	1
sundyxtrud	1
supg	1
surface-enhanced_raman_spectroscopy	1
syloxane	1
tack	1
tangential	1
telechelic	1
tellrite	1
temperature_dependency	1
test	1
the_nakamura_equation	1
thermodynamic_integral	1
thermostat	1
thread	1
tkd	1
tomography	1
transmission_electron_microscopy	1
trilobal	1
twente	1
twin_blade	1
two-dimensional	1
uldpe	1
universal_relation	1
unsteady_shear	1
viscoelastichybrid_material	1
viscosity_ratio	1
viscous	1
vof	1
wall_confinement	1
weld-line	1
ximex	1
xpp	1
xrd	1
zeolite	1

6rheology's list_kajiwara3 [120 articles] Export

6rheology's tags