Cost-effective broad-band electrical impedance spectroscopy measurement circuit and signal analysis for piezo-materials and ultrasound transducers Export

@article{citeulike:5287550, abstract = {This paper explains the circuitry and signal processing to perform electrical impedance spectroscopy on piezoelectric materials and ultrasound transducers. Here, we measure and compare the impedance spectra of 2-5 MHz piezoelectrics, but the methodology applies for 700 kHz-20 MHz ultrasonic devices as well. Using a 12 ns wide 5 volt pulsing circuit as an impulse, we determine the electrical impedance curves experimentally using Ohm's law and fast Fourier transform (FFT), and compare results with mathematical models. The method allows for rapid impedance measurement for a range of frequencies using a narrow input pulse, digital oscilloscope and FFT techniques. The technique compares well to current methodologies such as network and impedance analyzers while providing additional versatility in the electrical impedance measurement. The technique is theoretically simple, easy to implement and completed with ordinary laboratory instrumentation for minimal cost.}, author = {Jr, George K. and Sr, George K. and Olbricht, William}, citeulike-article-id = {5287550}, citeulike-linkout-0 = {http://dx.doi.org/10.1088/0957-0233/19/10/105102}, doi = {10.1088/0957-0233/19/10/105102}, journal = {Measurement Science and Technology}, keywords = {piezo}, number = {10}, pages = {105102+}, posted-at = {2009-07-28 07:24:19}, priority = {2}, title = {Cost-effective broad-band electrical impedance spectroscopy measurement circuit and signal analysis for piezo-materials and ultrasound transducers}, url = {http://dx.doi.org/10.1088/0957-0233/19/10/105102}, volume = {19}, year = {2008} }

TY - JOUR ID - citeulike:5287550 L3 - citeulike-article-id:5287550 N2 - This paper explains the circuitry and signal processing to perform electrical impedance spectroscopy on piezoelectric materials and ultrasound transducers. Here, we measure and compare the impedance spectra of 2-5 MHz piezoelectrics, but the methodology applies for 700 kHz-20 MHz ultrasonic devices as well. Using a 12 ns wide 5 volt pulsing circuit as an impulse, we determine the electrical impedance curves experimentally using Ohm's law and fast Fourier transform (FFT), and compare results with mathematical models. The method allows for rapid impedance measurement for a range of frequencies using a narrow input pulse, digital oscilloscope and FFT techniques. The technique compares well to current methodologies such as network and impedance analyzers while providing additional versatility in the electrical impedance measurement. The technique is theoretically simple, easy to implement and completed with ordinary laboratory instrumentation for minimal cost. IS - 10 JF - Measurement Science and Technology TI - Cost-effective broad-band electrical impedance spectroscopy measurement circuit and signal analysis for piezo-materials and ultrasound transducers VL - 19 SP - 105102 KW - piezo AU - Jr, George AU - Sr, George AU - Olbricht, William PY - 2008/// UR - http://dx.doi.org/10.1088/0957-0233/19/10/105102 ER -