Subjects held an instrumented object in a tripod grasp and moved it in the horizontal plane in various directions. The contact forces at the digits were measured and the grip force was decomposed into 2 components: a manipulating force responsible for accelerating the object and a grasping force responsible for holding the object steady. The grasping forces increased during the movement, reaching a peak near the time of peak velocity. The grasping forces also exhibited directional tuning, but this tuning was idiosyncratic for each subject. Although the overall grip forces should be modulated with acceleration, the load force did not vary during the task. Therefore the increase in the grasping force is not required to prevent slip. Rather, it is suggested that grasping force increases during translational motion to stabilize the orientation of grasped objects. 10.1152/jn.00775.2004