Printed electrochemical devices using conducting polymers as active materials on flexible substrates Export

@article{citeulike:731616, abstract = {This paper reports some of our initial works in pursuit of a simple and low-cost method of fabricating all-organic electrochemical diodes, triodes, and transistors on flexible plastic or paper substrates. Conducting polymer poly(3,4-ethylenedioxythiophene) poly(styrene sulfonate) (PEDOT : PSS), utilized as an active component, is deposited by spin-coating or printing techniques. The devices are directly fabricated from design without the need for masks, patterns, or dies. The output characteristics of both half-wave and full-wave rectifier circuits from two-terminal diodes show stable performances at frequencies below 5 Hz. In three-terminal tunable triodes, threshold voltage can be tuned in the range between 0.25 and 1.6 V. In four-terminal transistors, ambipolar operation function can be realized in one single device. I/sub ON//I/sub OFF/ current ratios of 10/sup 3/-10/sup 4/ have been achieved in the triode and transistor at operating voltages below 3 V. In addition, the device applications in electrochromic displays, logical circuits, as well as the switching speed of the circuits and device stability, are discussed.}, author = {Chen, Miaoxiang}, citeulike-article-id = {731616}, citeulike-linkout-0 = {http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=1461591}, journal = {Proceedings of the IEEE}, keywords = {conducting-polymer, flexible-electronics, macroelectronics, printing}, number = {7}, pages = {1339--1347}, posted-at = {2006-07-03 02:34:15}, priority = {2}, title = {Printed electrochemical devices using conducting polymers as active materials on flexible substrates}, url = {http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=1461591}, volume = {93}, year = {2005} }

TY - JOUR ID - citeulike:731616 L3 - citeulike-article-id:731616 N2 - This paper reports some of our initial works in pursuit of a simple and low-cost method of fabricating all-organic electrochemical diodes, triodes, and transistors on flexible plastic or paper substrates. Conducting polymer poly(3,4-ethylenedioxythiophene) poly(styrene sulfonate) (PEDOT : PSS), utilized as an active component, is deposited by spin-coating or printing techniques. The devices are directly fabricated from design without the need for masks, patterns, or dies. The output characteristics of both half-wave and full-wave rectifier circuits from two-terminal diodes show stable performances at frequencies below 5 Hz. In three-terminal tunable triodes, threshold voltage can be tuned in the range between 0.25 and 1.6 V. In four-terminal transistors, ambipolar operation function can be realized in one single device. I/sub ON//I/sub OFF/ current ratios of 10/sup 3/-10/sup 4/ have been achieved in the triode and transistor at operating voltages below 3 V. In addition, the device applications in electrochromic displays, logical circuits, as well as the switching speed of the circuits and device stability, are discussed. IS - 7 JF - Proceedings of the IEEE EP - 1347 TI - Printed electrochemical devices using conducting polymers as active materials on flexible substrates VL - 93 SP - 1339 KW - conducting-polymer KW - flexible-electronics KW - macroelectronics KW - printing AU - Chen, Miaoxiang PY - 2005/// UR - http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=1461591 ER -