Analysis of low cycle fatigue in AlMgSi aluminium alloys Export

@article{borrego04, abstract = {In this study low-cycle fatigue tests were performed in two AlMgSi aluminium alloys with different chemical composition, namely 6082-T6 and 6060-T6 alloys, using standard round specimens and tube specimens, respectively. The tests were undertaken in strain control with a strain ratio R[var epsilon]=-1. The cyclic stress-strain curves were determined using one specimen for each imposed strain level. The low-cycle fatigue results are used for the characterisation of the cyclic plastic response and the fatigue live of the alloys. Moreover, the geometry of the hysteresis loops and the occurrence of Masing behaviour are also analysed. The observed behaviour is discussed in terms of the chemical composition of the alloys (Mg2Si hardening particles and Mn dispersoid content) and fracture mechanisms. Alloy 6060-T6 exhibits nearly ideal Masing behaviour, while alloy 6082-T6 presents significant deviations from the Masing model. The type of cyclic deformation behaviour in AlMgSi alloys seems to be influenced by the dispersoid phase.}, author = {Borrego, L. P. and Abreu, L. M. and Costa, J. M. and Ferreira, J. M.}, citeulike-article-id = {449635}, citeulike-linkout-0 = {http://www.sciencedirect.com/science/article/B6V2X-4BP9HP4-5/2/e1e8333f4de682da455c3c6bbd0528ff}, doi = {10.1016/j.engfailanal.2003.09.003}, journal = {Engineering Failure Analysis}, keywords = {6082, bibtex-import, cyclic, fractography, low-cycle, stress-strain}, month = {October}, number = {5}, pages = {715--725}, pdf = {borrego04.pdf}, posted-at = {2005-12-25 12:44:48}, priority = {2}, title = {Analysis of low cycle fatigue in {AlMgSi} aluminium alloys}, url = {10.1016/j.engfailanal.2003.09.003}, volume = {11}, year = {2004} }

TY - JOUR ID - borrego04 L3 - citeulike-article-id:449635 N2 - In this study low-cycle fatigue tests were performed in two AlMgSi aluminium alloys with different chemical composition, namely 6082-T6 and 6060-T6 alloys, using standard round specimens and tube specimens, respectively. The tests were undertaken in strain control with a strain ratio R[var epsilon]=-1. The cyclic stress-strain curves were determined using one specimen for each imposed strain level. The low-cycle fatigue results are used for the characterisation of the cyclic plastic response and the fatigue live of the alloys. Moreover, the geometry of the hysteresis loops and the occurrence of Masing behaviour are also analysed. The observed behaviour is discussed in terms of the chemical composition of the alloys (Mg2Si hardening particles and Mn dispersoid content) and fracture mechanisms. Alloy 6060-T6 exhibits nearly ideal Masing behaviour, while alloy 6082-T6 presents significant deviations from the Masing model. The type of cyclic deformation behaviour in AlMgSi alloys seems to be influenced by the dispersoid phase. IS - 5 JF - Engineering Failure Analysis EP - 725 TI - Analysis of low cycle fatigue in {AlMgSi} aluminium alloys VL - 11 SP - 715 KW - 6082 KW - bibtex-import KW - cyclic KW - fractography KW - low-cycle KW - stress-strain AU - Borrego, LP AU - Abreu, LM AU - Costa, JM AU - Ferreira, JM PY - 2004/October// UR - http://www.sciencedirect.com/science/article/B6V2X-4BP9HP4-5/2/e1e8333f4de682da455c3c6bbd0528ff ER -