umbertoperego's library 200 articles Export

	The superconvergent patch recovery and <I>a posteriori</I> error estimates. Part 1: The recovery technique [My Copy] International Journal for Numerical Methods in Engineering, Vol. 33, No. 7. (1992), pp. 1331-1364. by O. C. Zienkiewicz, J. Z. Zhu posted to tetrapak shells by umbertoperego on 2009-11-26 17:24:04 as along with 1 person xfliu
	The standardisation of the EWF test [My Copy] Engineering Fracture Mechanics, Vol. 74, No. 7. (May 2007), pp. 1009-1017. by J. Williams, M. Rink posted to tetrapak fracture-mechanics essential-work-of-fracture by umbertoperego on 2009-11-26 13:35:11 as
	$My PDF kao-walter_04_fracture.pdf$ On the Fracture of Thin Laminates [My Copy] (2004) by Sharon Kao-Walter posted to tetrapak fracture-mechanics by umbertoperego on 2009-11-26 09:40:16 as
	Essential work of fracture compared to fracture mechanics—towards a thickness independent plane stress toughness [My Copy] Engineering Fracture Mechanics, Vol. 69, No. 5. (March 2002), pp. 617-631. by T. Pardoen, Y. Marchal, F. Delannay posted to tetrapak essential-work-of-fracture by umbertoperego on 2009-11-25 18:12:59 as
	On the essential work of fracture of linear low-density-polyethylene. I. Precision of the testing method [My Copy] Engineering Fracture Mechanics (31 May 2009) by A. Pegoretti, L. Castellani, L. Franchini, P. Mariani, A. Penati posted to tetrapak fracture-mechanics essential-work-of-fracture crack-propagation crack by umbertoperego on 2009-11-21 09:56:39 as
	3D numerical simulations of ductile targets subjected to oblique impact by sharp nosed projectiles [My Copy] International Journal of Solids and Structures (02 October 2009) by M. A. Iqbal, G. Gupta, N. K. Gupta posted to tetrapak shells cutting by umbertoperego on 2009-11-19 09:29:20 as
	Physical stabilization of the 4-node shell element with one point quadrature [My Copy] Computer Methods in Applied Mechanics and Engineering, Vol. 113, No. 3-4. (March 1994), pp. 321-350. by T. Belytschko, I. Leviathan posted to tetrapak stabilization shells by umbertoperego on 2009-11-18 16:21:45 as
	Advances in one-point quadrature shell elements [My Copy] Computer Methods in Applied Mechanics and Engineering, Vol. 96, No. 1. (April 1992), pp. 93-107. by T. Belytschko, B. L. Wong, H. Y. Chiang posted to tetrapak stabilization shells by umbertoperego on 2009-11-18 16:18:50 as
	Explicit algorithms for the nonlinear dynamics of shells [My Copy] Computer Methods in Applied Mechanics and Engineering, Vol. 42, No. 2. (February 1984), pp. 225-251. by T. Belytschko, J. I. Lin, C. S. Tsay posted to tetrapak stabilization shells by umbertoperego on 2009-11-18 16:16:15 as
	Out-of-plane stretching and tearing fracture in ductile sheet materials [My Copy] International Journal of Fracture, Vol. 84, No. 4. (1 April 1997), pp. 297-306. by C. M. Muscat-Fenech, A. G. Atkins posted to tetrapak cutting by umbertoperego on 2009-11-16 17:14:17 as
	Crack Street: The Cycloidal Wake of a Cylinder Tearing through a Thin Sheet [My Copy] Physical Review Letters, Vol. 91, No. 21. (Nov 2003), 215507. by A. Ghatak, L. Mahadevan posted to tetrapak cutting by umbertoperego on 2009-11-16 16:16:31 as
	A physically-based framework for real-time haptic cutting and interaction with 3D continuum models [My Copy] In SPM '07: Proceedings of the 2007 ACM symposium on Solid and physical modeling (2007), pp. 421-429. by Alex Lindblad, George Turkiyyah posted to tetrapak cutting by umbertoperego on 2009-11-16 16:13:14 as
	Cutting, by ‘pressing and slicing,’ of thin floppy slices of materials illustrated by experiments on cheddar cheese and salami [My Copy] Journal of Materials Science, Vol. 39, No. 8. (1 April 2004), pp. 2761-2766. by A. G. Atkins, X. Xu, G. Jeronimidis posted to tetrapak cutting by umbertoperego on 2009-11-16 11:45:30 as
	Modeling Soft-Tissue Deformation Prior to Cutting for Surgical Simulation: Finite Element Analysis and Study of Cutting Parameters [My Copy] Biomedical Engineering, IEEE Transactions on, Vol. 54, No. 3. (20 February 2007), pp. 349-359. by T. Chanthasopeephan, J. P. Desai, A. C. W. Lau posted to tetrapak cutting by umbertoperego on 2009-11-16 10:28:44 as
	An Eulerian shell formulation for fluid—structure interaction [My Copy] Computer Methods in Applied Mechanics and Engineering, Vol. 187, No. 3-4. (07 July 2000), pp. 571-590. by D. Benson, L. Stainier posted to tetrapak shells fsi fluid-structure-interaction by umbertoperego on 2009-11-13 17:10:31 as
	Quasi-static perforation of thin aluminium plates [My Copy] International Journal of Impact Engineering, Vol. 36, No. 3. (March 2009), pp. 486-497. by F. Grytten, T. Borvik, O. Hopperstad, M. Langseth posted to tetrapak cutting by umbertoperego on 2009-11-13 17:04:33 as
	Optimum blade configurations for the cutting of soft solids [My Copy] Engineering Fracture Mechanics, Vol. 73, No. 16. (November 2006), pp. 2523-2531. by T. Atkins posted to tetrapak cutting by umbertoperego on 2009-11-13 14:46:20 as
	Slicing of soft flexible solids with industrial applications [My Copy] International Journal of Mechanical Sciences, Vol. 47, No. 4-5. (April 2005), pp. 479-492. by A. Atkins, X. Xu posted to tetrapak cutting by umbertoperego on 2009-11-13 14:40:04 as along with 1 person TodesTeddy
	Determining fracture toughness from cutting tests on polymers [My Copy] Engineering Fracture Mechanics (30 July 2009) by Y. Patel, B. R. K. Blackman, J. G. Williams posted to no-tag by umbertoperego on 2009-11-13 14:31:39 as
	Mixed mode fracture toughness as a separation parameter when cutting polymers [My Copy] Engineering Fracture Mechanics (07 August 2009) by D. J. Wyeth, A. G. Atkins posted to tetrapak cutting by umbertoperego on 2009-11-13 14:29:03 as
	On the resistance to penetration of stiffened plates, Part II: Numerical analysis [My Copy] International Journal of Impact Engineering, Vol. 36, No. 7. (July 2009), pp. 875-887. by Hagbart S. Alsos, Jørgen Amdahl, Odd S. Hopperstad posted to tetrapak cutting by umbertoperego on 2009-11-13 14:25:54 as
	First Observation of Stick−Slip Instability in Tearing of Poly(vinyl alcohol) Gel Sheets [My Copy] Macromolecules, Vol. 42, No. 15. (11 August 2009), pp. 5425-5426. by Yoshimi Tanaka, Hiroyuki Abe, Takayuki Kurokawa, Hidemitsu Furukawa, Jian P. Gong posted to tetrapak cutting by umbertoperego on 2009-11-13 14:16:41 as
	Denting and fracture of sheet steel by blunt and sharp obstacles in glancing collisions [My Copy] International Journal of Impact Engineering, Vol. 21, No. 7. (1 August 1998), pp. 499-519. by C. Muscat-Fenech, A. G. Atkins posted to tetrapak cutting crack-propagation by umbertoperego on 2009-11-13 11:27:17 as
	Experimental and numerical modelling of ductile crack propagation in large-scale shell structures [My Copy] Marine Structures, Vol. 17, No. 1. (January 2004), pp. 1-27. by B. Simonsen, R. Törnqvist posted to tetrapak cutting by umbertoperego on 2009-11-13 11:23:16 as
	On the sharpness of straight edge blades in cutting soft solids: Part I – indentation experiments [My Copy] Engineering Fracture Mechanics, Vol. 74, No. 14. (September 2007), pp. 2205-2224. by C. McCarthy, M. Hussey, M. Gilchrist posted to tetrapak cutting by umbertoperego on 2009-11-13 10:37:35 as along with 1 person TodesTeddy
	Alternative stress-integration schemes for large-deformation problems of solid mechanics [My Copy] Finite Elements in Analysis and Design (29 October 2009) by Majidreza Nazem, John P. Carter, Daichao Sheng, Scott W. Sloan posted to time-integration plasticity large-deformations by umbertoperego on 2009-11-12 08:50:54 as
	Fluid-structure interaction problems with strong added-mass effect [My Copy] International Journal for Numerical Methods in Engineering, Vol. 80, No. 10. (2009), pp. 1261-1294. by S. R. Idelsohn, F. Del Pin, R. Rossi, E. Oñate posted to no-tag by umbertoperego on 2009-11-09 17:42:04 as
	Characterization and modeling of rate effects in the dynamic propagation of mode-II delamination in composite laminates [My Copy] International Journal of Fracture, Vol. 160, No. 1. (1 November 2009), pp. 55-71. by Jean-Mathieu Guimard, Olivier Allix, Nicolas Pechnik, Pascal Thévenet posted to tetrapak delamination damage cohesive by umbertoperego on 2009-11-03 09:15:10 as
	Thin-walled structures as impact energy absorbers [My Copy] Thin-Walled Structures, Vol. 41, No. 2-3. (February 2003), pp. 91-107. by W. Abramowicz posted to tetrapak shells folding buckling by umbertoperego on 2009-10-27 15:21:11 as
	Energy absorption of metallic cylindrical shells with induced non-axisymmetric folding patterns [My Copy] International Journal of Impact Engineering, Vol. 30, No. 8-9. (October 2004), pp. 1209-1223. by J. Marsolek, H. Reimerdes posted to tetrapak shells folding buckling by umbertoperego on 2009-10-27 15:19:05 as
	Multiaxial softening hinge model for tubular vehicle roll-over protective structures [My Copy] International Journal of Mechanical Sciences, Vol. 43, No. 9. (September 2001), pp. 2147-2170. by T. H. Kim, S. R. Reid posted to no-tag by umbertoperego on 2009-10-27 15:10:05 as
	Flat-topped conical shell under axial compression [My Copy] International Journal of Mechanical Sciences, Vol. 43, No. 9. (September 2001), pp. 2125-2145. by P. Xue, T. X. Yu, X. M. Tao posted to no-tag by umbertoperego on 2009-10-27 15:07:37 as
	Experimental and numerical studies of dynamic axial compression of thin walled spherical shells [My Copy] International Journal of Impact Engineering, Vol. 30, No. 8-9. (2004) by N. K. Gupta, Venkatesh posted to tetrapak shells folding by umbertoperego on 2009-10-27 15:03:37 as
	Deformation-induced folding systems in thin-walled monolithic hexagonal metallic honeycomb [My Copy] International Journal of Solids and Structures, Vol. 41, No. 11-12. (June 2004), pp. 3353-3377. by D. Mohr, M. Doyoyo posted to tetrapak shells folding by umbertoperego on 2009-10-27 14:46:40 as
	An analysis of crack growth in thin-sheet metal via a cohesive zone model [My Copy] Engineering Fracture Mechanics, Vol. 69, No. 18. (December 2002), pp. 2073-2093. by W. Li, T. Siegmund posted to tetrapak shells crack-propagation by umbertoperego on 2009-10-27 14:22:20 as
	Line-spring finite element for fully plastic crack growth—II. Surface-cracked plates and pipes [My Copy] International Journal of Solids and Structures, Vol. 35, No. 36. (December 1998), pp. 5139-5158. by H. Lee, D. Parks posted to tetrapak shells crack-propagation by umbertoperego on 2009-10-27 12:21:00 as
	Line-spring finite element for fully plastic crack growth-I. Formulation and one-dimensional results [My Copy] International Journal of Solids and Structures, Vol. 35, No. 36. (December 1998), pp. 5115-5138. by H. Lee, D. Parks posted to tetrapak shells crack-propagation by umbertoperego on 2009-10-27 12:19:41 as
	An experimental and computational study of laminated paperboard creasing and folding [My Copy] International Journal of Solids and Structures (25 August 2009) by L. A. A. Beex, R. H. J. Peerlings posted to tetrapak paperboard folding delamination crease by umbertoperego on 2009-10-13 08:56:23 as
	Cohesive zone modeling of interfacial stresses in plated beams [My Copy] International Journal of Solids and Structures (18 August 2009) by Laura De Lorenzis, Giorgio Zavarise posted to mapei delamination cohesive by umbertoperego on 2009-10-13 08:53:05 as along with 1 person jenda_z
	Towards the treatment of boundary conditions for global crack path tracking in three-dimensional brittle fracture [My Copy] Computational Mechanics, Vol. 45, No. 1. (1 December 2009), pp. 91-107. by Philippe Jäger, Paul Steinmann, Ellen Kuhl posted to crack-propagation crack 3d by umbertoperego on 2009-10-06 09:20:37 as along with 1 person jenda_z
	Computational fluid–structure interaction: methods and application to a total cavopulmonary connection [My Copy] Computational Mechanics, Vol. 45, No. 1. (1 December 2009), pp. 77-89. by Yuri Bazilevs, M. C. Hsu, D. Benson, S. Sankaran, A. Marsden posted to fsi fluid-structure-interaction by umbertoperego on 2009-10-06 09:15:22 as
	Coupling subdomains with heterogeneous time integrators and incompatible time steps [My Copy] Computational Mechanics, Vol. 44, No. 6. (1 November 2009), pp. 825-843. by Najib Mahjoubi, Anthony Gravouil, Alain Combescure posted to time-integration parallelization multiscale dynamics domain_decomposition_methods by umbertoperego on 2009-10-01 14:58:47 as
	Finite element analysis of concrete swelling due to alkali-aggregate reactions in dams [My Copy] Computers & Structures, Vol. 60, No. 4. (26 June 1996), pp. 601-611. by P. Leger, P. Coté, R. Tinawi posted to dams anisotropic-damage aar by umbertoperego on 2009-09-22 11:11:10 as
	Olgierd C. Zienkiewicz (18 May 1921-2 January 2009) [My Copy] International Journal for Numerical Methods in Engineering, Vol. 80, No. 1. (2009), pp. 1-45. by Robert L. Taylor, Roland W. Lewis posted to no-tag by umbertoperego on 2009-09-18 17:39:38 as
	A phantom node formulation with mixed mode cohesive law for splitting in laminates [My Copy] International Journal of Fracture, Vol. 158, No. 2. (1 August 2009), pp. 107-124. by F. van der Meer, L. Sluys posted to tetrapak delamination crack-propagation by umbertoperego on 2009-09-02 13:39:42 as
	Development of Continuum Damage Mechanics for Elastic Solids Sustaining Anisotropic and Unilateral Damage [My Copy] International Journal of Damage Mechanics, Vol. 2, No. 4. (1 October 1993), pp. 311-329. by J. L. Chaboche posted to aar anisotropic-damage by umbertoperego on 2009-07-29 11:59:36 as
	A damage constitutive model accounting for induced anisotropy and bimodular elastic response [My Copy] Latin American Journal of Solids and Structures, Vol. 1, No. 1. (2003), pp. 101-117. by S. P. Proença, J. J. de Cerqueira Pituba posted to aar anisotropic-damage by umbertoperego on 2009-07-29 11:56:23 as
	A constitutive theory for the inelastic behavior of concrete [My Copy] Mechanics of Materials, Vol. 4, No. 1. (March 1985), pp. 67-93. by M. Ortiz posted to aar anisotropic-damage concrete by umbertoperego on 2009-07-29 11:45:19 as
	Strain- and stress-based continuum damage models—I. Formulation [My Copy] International Journal of Solids and Structures, Vol. 23, No. 7. (1987), pp. 821-840. by J. Simo, J. Ju posted to aar anisotropic-damage by umbertoperego on 2009-07-29 11:43:22 as
	Continuum Damage Mechanics, Anisotropy and Damage Deactivation for Brittle Materials Like Concrete and Ceramic Composites [My Copy] International Journal of Damage Mechanics, Vol. 4, No. 1. (1 January 1995), pp. 5-22. by J. L. Chaboche, P. M. Lesne, J. F. Maire posted to aar anisotropic-damage by umbertoperego on 2009-07-29 11:36:58 as

Note: You may cite this page as: http://www.citeulike.org/user/umbertoperego

Result page: 1 2 3 4 Next

tetrapak	131
shells	47
cutting	24
crack-propagation	21
crease	21
paperboard	21
aar	20
damage	16
delamination	16
anisotropic-damage	15
fluid-structure-interaction	15
fsi	15
cohesive	13
time-integration	12
cfd	11
plasticity	11
fracture-mechanics	9
stability	9
crack	8
fluids	8
stabilization	8
dynamics	7
fracture	7
buckling	6
concrete	6
dams	6
folding	6
interface	6
adhesive	5
mapei	5
navier-stokes	5
particle	4
essential-work-of-fracture	3
gradient-plasticity	3
incompressibility	3
multiscale	3
variational	3
3d	2
added-mass	2
composites	2
contact	2
damage-plasticity	2
discontinuous-galerkin	2
earthquake	2
error	2
large-deformations	2
parallelization	2
x-fem	2
anisotropy	1
arch-dams	1
arc-length	1
compression	1
configurational-forces	1
damage-tolerant	1
domain_decomposition_methods	1
fatigue	1
finite-calculus	1
fractional-derivatives	1
frame-indifference	1
griffith	1
hyperelatic	1
j-integral	1
kinking	1
large-rotations	1
localization	1
mixed-mode	1
moisture	1
non-local	1
pasternak	1
perego	1
remeshing	1
rope	1
transition-continuum-discontinuum	1

umbertoperego's library 200 articles Export

umbertoperego's tags